[ENG] 7.5. [DKSF 48.5 IU] I Want to Configure Sending Notifications When a Logic Level of an IO Line is changed. How to Do This?

Sending notifications are configured when the logical level of the IO line is changed on the “DISCRETE IO” page of the device’s web interface:

When you click on the “Setup” button, you can see a setting menu for sending notifications of the following types: Log, Syslog, Email, SMS (in devices with a built-in GSM modem) and SNMP Trap, as well as decryption of digital values of the current level of the IO line:

where:

Front (Level Change 0-> 1) - a checkbox, when installed, the device will send notifications if the status of the IO line has been changed from “0” to “1”.In default: the checkbox is not installed.

Decay (Level Change 1-> 0) - a checkbox, when installed, the device will send notifications if the sensor status has been changed from "1" to "0". In default: the checkbox is not installed.

Include in Summary Report  - a checkbox, when installed, reports on the status of the IO line will be sent by email and / or SMS. Report sending time is configured on the "SMS" and "EMAIL" pages.In default: the checkbox is not installed.

Logic 1 - a description of a numerical value of the level “Logic 1"  of an IO line. This decryption will be displayed in the entry field “Legend” on the "DISCRETE IO” page of the device’s web interface and be present in SNMP TRAP messages.

Logic 0 - a description of a numerical value of the level “Logic 0"  of an IO line. This decryption will be displayed in the entry field “Legend” on the "DISCRETE IO” page of the device’s web interface and be present in SNMP TRAP messages.

Colour - the choice of the color of the virtual logical level indicator, which is displayed on the “DISCRETE IO” page (the color of the physical LED indicators on the front panel cannot be adjusted), possible options are “white”, “gray”, “orange”, “red”, “ green". In Default: for “Logic 1 "- green, for" Logic 0 ”is gray.

After configuring all the required settings, click the "Apply Changes" button.