[ENG] 7.2. [DKSF 48.5 IU] Configuring an Operation Mode for an Input-Output Line

To configure an operation mode of an IO-line, there is a need to go to the page «DISCRETE IO» of the device`s web interface:

where:

IOMode — allows you to set the IO Linein the "Input", "Output" modes. In Default: Input.

On the «DISCRETE IO» pake, current settings of the discrete input-output channels are displayed. In the «Input» and «Output» modes, it is possible to configure automatic sending of SNMP TRAP, SYSLOG, email, SMS notifications (in devices with a built-in GSM modem), notifications in a log and sending  periodic reports about a status. In the «Output» mode, it is possible to set a logic level on a line through the web, SNMP, and HTTP API interfaces. In the “Output Logic Level” mode, the logic level on the line is set by the logic module.