[ENG] 5.4. [DKSF 48.5 IU] Viewing Readings and Configuring Parameters of the Humidity Sensor in a Web Interface

To browse readings and a configuration of humidity sensor parameters, there is a need to go to the page «HUMIDITY» of a device web interface:

where:

Sensor status – determines a sensor status in a current moment of time. Possible variants are: «sensor failed», «within a safe range», «below a safe range», «above a safe range»;

Relative Humidity – shows readings of a sensor, which measures a relative humidity in %;

Temperature – shows readings of a temperature sensor, embedded into a humidity sensor, in °C;

Dew Point – is a dew point temperature, which is calculated from readings of a humidity sensor and a temperature, in °C;

Top Margin of Humidity Safe Range – is a humidity value, exceeding which a sensor switches to a status «above a safe range». Hysteresis is ± 1 percentage point. On default: 85

Bottom Margin of Humidity Safe Range – is a humidity value dropping below which a sensor switches to a status «below a safe range». Hysteresis is ± 1 percentage point. On default: 5