[ENG] 4.6. [DKSF 48.5 IU] I Want to Configure Sending the Notifications When a Status of a Temperature Sensor is changed. How to Do This?

Sending notifications when a status of a temperature sensor is changed is configured at the page «TEMPERATURE» of a device web interface:

Configuring the sending of notifications for the status change of a temperature sensor in a web interface of a NetPing device

When clicking the button «Setup», the menu of settings appears for configuring notifications of the next types: Log, Syslog, Email, SMS (in devices with a built-in GSM modem) and SNMP Trap:

where:

  • Temperature is above safe range — is check boxes enabling sending notifications when the top margin of the safe temperature range is exceeded. On default: a checkbox is not checked.
  • Temperature is in safe range — is checkboxes enabling sending notifications if the current temperature is back to the safe range. On default: a checkbox is not checked.
  • Temperature is below safe range — is checkboxes enabling sending notifications if the current temperature falls below the bottom margin of the safe range. On default: a checkbox is not checked.
  • Sensor fault — is checkboxes enabling sending notifications in case if a sensor fails. On default: a checkbox is not checked.
  • Include in Summary Report — is checkboxes enabling sending periodic reports about the status of a sensor via email and/or SMS. The time of sending reports is indicated at the pages «SMS» and «EMAIL». On default: a checkbox is not checked.
  • Switch On/Off All Notifications — is a checkbox that switches on and off all possible notification types for all events at once. On default: a checkbox is not checked.
  • Repeat 3 Times Alarm Notification with Period — is an option for the third-time repeats of the alarm notification with the specified interval (5, 30 minutes, 2, 6, 12, 24 hours). If readings are back to the safe range, repeats are stopped. A repeated notification contains the time of the initial event (for example, 23:21:15.719 Thermo: chan.1 +26C, above the safe range (10..20C) since 01.06 23:16).

After setting up all necessary settings, click the button «Save».