[ENG] 3.7. [DKSF 48.5 IU] There is a need to send SNMP Trap Notifications. How Can I Configure This?

IP-addresses for sending SNMP TRAP notifications are configured on the page «SETUP» of a device web interface. This group of settings allows setting up to two addresses where SNMP TRAP notifications will be sent to using an SNMP protocol.

Events that are going to trigger these notifications are going to be specified on the other pages of a device web interface.

In the section «SNMP TRAP», it is possible to configure the next:

SNMP Trap Destination #1 — is a field for setting up or changing the first address where SNMP TRAP notifications are going to be sent to. It is acceptable to indicate either an IP address or a domain name. An empty field means that SNMP TRAP-notifications are not going to be sent. On default: the address is not specified.

SNMP Trap Destination #2  — is a field for setting up or changing the second address where SNMP TRAP notifications are going to be sent to. It is acceptable to indicate either an IP address or a domain name. An empty field means that SNMP TRAP-notifications are not going to be sent. On default: the address is not specified.

Port — is a field for setting up a port (for each address), where SNMP TRAP notifications are going to be sent to. On default: 162.

After setting all necessary parameters, click the button «Apply changes».