[ENG] 3.10. [DKSF 48.5 IU] How to Receive Notifications and Reports via Email?

To configure the module for sending e-mail notifications and reports about a status, there is a need to go to the page «E-MAIL» of a web interface. The equipment sends notifications using an SMTP protocol. 

Events, on which e-mail notifications will be sent, are set at other pages of a device web interface.

where:

Enable Sending of E-mail – when unchecking the checkbox a device will not send e-mail notifications. This was designed, first of all, to handle maintenance in a server room, as well as the one of the equipment. On default: checkbox is not checked

SMTP Server Address  is an email address for an incoming mail. On default: empty line

SMTP Server TCP Port  is an email server port, which works via an SMTP protocol. On default: 25

Username  is a username of an SMTP server. On default: empty line

Password  is a password of an SMTP server user. On default: empty line

From  a sender's address. On default: empty line

To  a destination address for e-mail notifications. On default: empty line

Copy To (сс:) – addresses of secondary recipients for e-mail notifications, to whom a copy is sent. On default: empty line

Time for Summary Reports (HH:MM 24h format, up to 12 time points, divided by space) – is a time when reports on a status of sensors will be sent via e-mail. On default: empty line

After setting the parameters, click the button «Apply changes».

  You can add a display of the device name in the email notification. You can find wow to do it  on the page  « [ENG] 3.1. [DKSF 48.5 IU] How to Set up a Hostname, a Location and the Contacts of the Device?».

The device works only with the email servers that support an SMTP-protocol and authentication methods AUTH PLAIN and AUTH LOGIN, as well as a no-authentication method! At the same time, the device does not support SSL, TLS or any other encoding!