[ENG] 2.6. [DKSF 48.5 IU] How Can I Reboot the Device?

The NetPing device you can reboot using two ways:

  1. Press the "Reboot" button on the "HOME" page of the device`s web-interface.

    After that, the system will issue an informational message confirming the reboot of the device.
  2. When you click the Reboot button in this message, the CPU LEDs on the Ethernet ports will flash, and the device will reboot. The uptime of the device will reset to 0d 0h 0m 0s. 
  3. Using the SNMP v1 protocole via setting the values by the OID command.

    OID
    The name
    The type
    The access
    The Description

    .1.3.6.1.4.1.25728.911.1.0

    npSoftReboot

    Integer

    READ/WRITE

    Software reboot of the device while recording the value “1” (analogue to rebooting the device via the web interface)

    .1.3.6.1.4.1.25728.911.3.0

    npForceReboot

    Integer

    READ/WRITE

    Immediate forced reboot of the device while recording the value “1” (processor reset, similar to the situation when turning on the power)

  4. Via the SMS-command «RB20».