[ENG] 7.2. [DKSF 54.3 IU] I Want to Configure Sending Notifications from the Module «Watchdog». How to Do This?

Notifications from the module «Watchdog» are configured on the page «WATCHDOG» of a device web interface: 

NetPing - Configuring notifications from Watchdog

When clicking the button «Setup», a menu of settings appears for sending notifications of the next types: Log, Syslog, E-mail, SMS, and SNMP Trap:

NetPing - Notifications from Watchdog


Reset – is a checkbox, when checked a device will send notifications when «Watchdog» triggers and reboots (short-term switching on/off) a relay. On default: checkbox is not checked.

Suspention of Unsuccessful Resets  is a checkbox, when checked, a device will send notifications about switching the module «Watchdog» in the standby mode. If the watchdog is not successful in restoring the connection with a connected device or a specified number of resets, then the module is switched to the standby mode. On default: checkbox is not checked.

Include in Summary Report  is a checkbox, when checked, reports about a status of a watchdog will be sent via e-mail and/or SMS. TIme of sending reports is specified on the pages «SMS» and «E-MAIL»On default: checkbox is not checked.

After setting all necessary parameters, click the button «Apply changes».