[ENG] 5.3. [DKSF 53/203.1 IU] I Want to Configure Sending Notifications When Changing a Status of a Humidity Sensor. How to Do This?

Sending notifications when a humidity sensor status is changed is configured at the page «HUMIDITY» of a device web interface:

When clicking the button «Setup» a menu of settings for sending notifications of the next types appears: Log, Syslog, E-mail, SMS (in devices with an embedded GSM modem) and SNMP Trap:

where:

Humidity is above Safe range – is a checkbox, when checked a device will send notifications if a relative humidity is above a top margin of a safe range for a humidity sensor. On default: checkbox is not checked

Humidity is in Safe range  – is a checkbox, when checked a device will send notifications if a relative humidity is within margins of a safe range for a humidity sensor. On default: checkbox is not checked

Humidity is below Safe range – is a checkbox, when checked a device will send notifications if a relative humidity is below a bottom margin of a safe range for a humidity sensor. On default: checkbox is not checked

Sensor Fault – is a checkbox, when checked a device will send notifications if a connection with a sensor is lost. On default: checkbox is not checked

Include in Summary Report – is a checkbox, when checked reports about a humidity sensor status will be sent via e-mail and/or SMS (in a device with an embedded GSM modem). A time for sending reports is set at the pages «SMS» and «E-MAIL». On default: checkbox is not checked

After configuring all necessary settings, click the button «Apply changes».