[ENG] 7.4. [DKSF 52/202.10 IU] How to Manage an Input-Output Line in the «Output» Mode?

To manage an IO line, there is a need to go to the page «DISCRETE IO» of a device web interface:

  1. Set an IO line to the «output» operation mode;
  2. Check a checkbox «Output Logic Level» at «Logic 1» or «Logic 0»;
  3. Save parameters by clicking the button «Apply Changes»

Input Logic Level – is a field displaying a current logic level of an IO line. It is updated automatically when changing a logic level of a line with no need to reload an entire page;

Output Logic Level – is a parameter of a logic level of a line, which works as an «output». A logic status «1» means having voltage at an output line (a scheme with an open collector). A logic status «0» means having 0V at an IO line. On default: logic «0»;

Single Pulse Generation – when clicking the button «pulse», an IO line, which works as an output, will be inverted for a specified period of time. A pulse duration is set in the field «Pulse Duration (100-25500ms, step 100ms)». If a line is set to «output», then the button for issuing a pulse will not be active.