[ENG] 5.2. [DKSF 52/202.10 IU] Browsing Readings and Configuring Parameters of a Humidity Sensor in a Web Interface

To browse readings and configurations of parameters of a humidity sensor, there is a need to go to the page «HUMIDITY» of a device web interface:

where:

Sensor Status – determines a status of a sensor in a current moment of time. Possible variants: «Sensor does not work», «within a safe range», «below a safe range», «above a safe range»;

Relative Humidity – are readings of a sensor, which determines a relative humidity, in %;

Temperature – are readings of a temperature sensor, built into a humidity sensor, in °C;

Dew Point – is a dew point, calculated from readings of a humidity sensor and a temperature, in °C;

Top Margin of Humidity Safe Range – is a humidity value, when rising above it, a sensor switches to the status «above a safe range». Hysteresis is ± 1 percent point. On default: 85

Bottom Margin of Humidity Safe Range– is a humidity value, when falling below it, a device switches to the status «below a safe range». Hysteresis is ± 1 percent pointOn default: 5