[ENG] 4.5. [DKSF 52/202.10 IU] I Want to Configure Sending Notifications When a Status of a Temperature Sensor Is Changed. How to Do This?

Sending notifications when a status of a temperature sensor is changed, is configured at the page «TEMPERATURE» of a device web interface:

When clicking the button «Configure» a menu of settings is displayed for sending notifications of the following types: Log, Syslog, E-mail, SMS (in devices with an embedded GSM modem) and SNMP Trap:

where:

Temperature is above safe range – is a checkbox, when checked a device will send notifications if a current temperature is above a top margin of a safe range for this temperature sensor. On default: checkbox is not checked

Temperature is in safe range – is a checkbox, when checked a device will send notifications if a current temperature is back to margins of a safe range for this sensor. On default: checkbox is not checked

Temperature is below safe range – is a checkbox, when checked a device will send notifications if a current temperature is below a bottom margin of a safe range for this temperature sensor. On default: checkbox is not checked

Sensor fault – is a checkbox, when checked a device will send notification if a connection with a sensor is lost. On default: checkbox is not checked

Include in Summary Report – is a checkbox when checked reports about a sensor status will be sent via e-mail and/or SMS (in a device will an embedded GSM modem). Time of sending reports is indicated at the pages «SMS» and «E-MAIL». On default: checkbox is not checked

After setting all necessary parameters, click the button «Apply changes».